[Mageia-discuss] Problem after the last glibc update 01-02-2012 : startup process very long and regular freezing with big activity disk

Vinet Raphaël superaphke at gmail.com
Sun Feb 19 15:55:06 CET 2012


Hi,
1. Result of smartctl -a /dev/sda
...
SMART Error Log Version: 1
ATA Error Count: 375 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 375 occurred at disk power-on lifetime: 11302 hours (470 days + 22 
hours)
  When the command that caused the error occurred, the device was active or 
idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 2f 11 a0 e0  Error: UNC at LBA = 0x00a0112f = 10490159

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 2f 11 a0 e0 00      00:11:44.801  READ DMA EXT
  ec 00 00 00 00 00 a0 00      00:11:55.130  IDENTIFY DEVICE
  ef 03 42 00 00 00 a0 00      00:11:55.130  SET FEATURES [Set transfer mode]
  ec 00 00 00 00 00 a0 00      00:11:55.129  IDENTIFY DEVICE
  25 00 08 2f 11 a0 e0 00      00:11:55.129  READ DMA EXT

Error 374 occurred at disk power-on lifetime: 11302 hours (470 days + 22 
hours)
  When the command that caused the error occurred, the device was active or 
idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 2f 11 a0 e0  Error: UNC at LBA = 0x00a0112f = 10490159

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 2f 11 a0 e0 00      00:11:44.801  READ DMA EXT
  ec 00 00 00 00 00 a0 00      00:11:44.800  IDENTIFY DEVICE
  ef 03 42 00 00 00 a0 00      00:11:41.838  SET FEATURES [Set transfer mode]
  ec 00 00 00 00 00 a0 00      00:11:41.837  IDENTIFY DEVICE
  25 00 08 2f 11 a0 e0 00      00:11:41.837  READ DMA EXT

Error 373 occurred at disk power-on lifetime: 11302 hours (470 days + 22 
hours)
  When the command that caused the error occurred, the device was active or 
idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 2f 11 a0 e0  Error: UNC at LBA = 0x00a0112f = 10490159

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 2f 11 a0 e0 00      00:11:44.801  READ DMA EXT
  ec 00 00 00 00 00 a0 00      00:11:44.800  IDENTIFY DEVICE
  ef 03 42 00 00 00 a0 00      00:11:41.838  SET FEATURES [Set transfer mode]
  ec 00 00 00 00 00 a0 00      00:11:41.837  IDENTIFY DEVICE
  25 00 08 2f 11 a0 e0 00      00:11:41.837  READ DMA EXT

Error 372 occurred at disk power-on lifetime: 11302 hours (470 days + 22 
hours)
  When the command that caused the error occurred, the device was active or 
idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 2f 11 a0 e0  Error: UNC at LBA = 0x00a0112f = 10490159

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 2f 11 a0 e0 00      00:11:44.801  READ DMA EXT
  ec 00 00 00 00 00 a0 00      00:11:44.800  IDENTIFY DEVICE
  ef 03 42 00 00 00 a0 00      00:11:41.838  SET FEATURES [Set transfer mode]
  ec 00 00 00 00 00 a0 00      00:11:41.837  IDENTIFY DEVICE
  25 00 08 2f 11 a0 e0 00      00:11:41.837  READ DMA EXT

Error 371 occurred at disk power-on lifetime: 11302 hours (470 days + 22 
hours)
  When the command that caused the error occurred, the device was active or 
idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 2f 11 a0 e0  Error: UNC at LBA = 0x00a0112f = 10490159

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 2f 11 a0 e0 00      00:11:37.305  READ DMA EXT
  ec 00 00 00 00 00 a0 00      00:11:37.304  IDENTIFY DEVICE
  ef 03 42 00 00 00 a0 00      00:11:41.838  SET FEATURES [Set transfer mode]
  ec 00 00 00 00 00 a0 00      00:11:41.837  IDENTIFY DEVICE
  25 00 08 2f 11 a0 e0 00      00:11:41.837  READ DMA EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  
LBA_of_first_error
# 1  Extended offline    Completed without error       00%      3735         -
# 2  Extended offline    Completed without error       00%      3568         -
# 3  Extended offline    Completed without error       00%      3400         -
# 4  Extended offline    Completed without error       00%      3233         -
# 5  Extended offline    Completed without error       00%      3066         -
# 6  Extended offline    Completed without error       00%      2898         -
# 7  Extended offline    Completed without error       00%      2731         -
# 8  Extended offline    Completed without error       00%      2563         -
# 9  Extended offline    Completed without error       00%      2396         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

2. Something related, interesting or not I don't know but to see if in the 
worst case ... I reuse the DVD to simulate a repair / new install and it is 
blocking here
'Installation du pilote pour la carte 
disk/card_reader/ide/scsi/hardware_raid/sata/firewire/virtual intel 
corporation/ch9m/m-e sata ahci controller'

Le dimanche 19 février 2012 13:22:33 Thomas Backlund, vous avez écrit :

> This is not a glibc issue.
> 
> This is your harddisk failing.
> it reports media errors, that are unrecoverable.
> You better replace it as soon as possible.
> 
> You can check the disk status by installing smartmontools and do a
> 
> smartctl -a /dev/sda
> 
> --
> Thomas
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </pipermail/mageia-discuss/attachments/20120219/6fe77e97/attachment-0001.html>


More information about the Mageia-discuss mailing list